Apexior No. 1
Apexior No. 1

Apexior No. 1

Rs.12,600.00
In Stock
Apexior No. 1 is an anti-corrosive coating for internal surfaces of boiler drums, tubes, water walls, economisers, steam accumulators, etc.
Apexior No. 1

Apexior No. 1

Apexior No. 1 is an anti-corrosive coating for internal surfaces of boiler drums, tubes, water walls, economisers, steam accumulators, etc. Use Apexior No. 1 can be used on boiler drums,...
Rs.12,600.00
Size:
Delivery time: 4-5 working days
Delivery time varies from location to location
  • Description

    Apexior No. 1 is an anti-corrosive coating for internal surfaces of boiler drums, tubes, water walls, economisers, steam accumulators, etc.

    Use

    Apexior No. 1 can be used on boiler drums, tubes, water walls, economisers, evaporators, steam accumulators, calorifiers, steam turbine casings, and water softeners in contact with hot water above 93˚C (200˚F) minimum.

    Surface

    All loose mill scale and rust should be removed. Where possible, grit blast to 2nd Quality BS 4232. Recommended maximum profile should be 0.75 µm. If blast cleaning is not practical, make full use of mechanical tools, along with hand wire-brushing to remove loose rust and scale back to a firm edge. Excessive burnishing of steel should be avoided. Remove other contaminants, oil, grease, etc., by use of a solvent. The surface must be clean and dry prior to coating.

    Application

    No separate primer is necessary. One coat of Apexior No. 1 should be applied with brush directly to clean steel. Work well into the surface and ensure all corners, edges, welded nuts/bolts are covered. Allow approximately 6 to 8 hours at 20˚C before overcoating. Apply further 2 coats of Apexior No. 1 with brush or roller, allowing 6 to 8 hours between coats. After applying the last coat, allow 12 to 16 hours for drying to permit solvent evaporation from the system. At this point, the coating will be dry but not cured or water-resistant. It is essential for coating performance that tank or boiler should be filled with water, and water temperature raised to above 100˚C (212˚F) for a minimum 5 hours period. This has the effect of baking the Apexior, thus producing an inert, insoluble and impermeable film.

    Drying Time

    Allow 6 to 8 hours between coats for drying. The last coat should be allowed to dry for 12 to 16 hours to let solvent evaporate from the system. Water temperature should be raised above 100˚C for 5 hours minimum for full curing of paint film.

    Coverage

    Apexior No. 1 covers approximately 8 to 10 meter square per litre at 38 microns DFT depending on surface roughness.

    Packaging

    Apexior No. 1 is available in 5 litre packs.

Delivery time: 4-5 working days
Delivery time varies from location to location

SHIPPING INFORMATION

Fast and Reliable Delivery with Berger Paints Pakistan

At Berger Paints Pakistan, we prioritize the timely and secure delivery of your orders. Here's everything you need to know about our shipping policy:

1. Delivery Timeframes Standard Shipping: Typically, orders are delivered within 3-5 business days. Express Shipping: For urgent needs, we offer express shipping, delivering within 1-2 business days.

2. Shipping Charges Standard Shipping: Free for orders above PKR 5000. For orders below, a nominal fee of PKR 200 is applied. Express Shipping: Charges vary based on location and order size.

3. Order Tracking Upon dispatch, you will receive a tracking number via email/SMS, allowing you to monitor your order's progress in real-time.

4. Shipping Partners We collaborate with top logistics companies to ensure your products are handled with care and delivered promptly.

5. International Shipping Currently, we do not offer international shipping. Our services are limited to addresses within Pakistan.

6. Handling Time Orders are processed and dispatched within 24 hours of placement, except on weekends and public holidays. For any further queries about our shipping policies, please contact our customer service team.

Return Policy


Hassle-Free Returns at Berger Paints Pakistan

Customer satisfaction is our priority at Berger Paints Pakistan. If you're not entirely satisfied with your purchase, we offer a straightforward return process.

1. Eligibility for Returns Products must be returned within 30 days of receipt. Items should be unused, in original packaging, and in resalable condition.

2. Non-Returnable Items Custom-mixed paints and clearance items are not eligible for returns.

3. Return Process Step 1: Contact our customer service to initiate a return. Provide your order number and reason for return.
Step 2: Securely pack the items and include the original invoice.
Step 3: Ship the package to our designated return address provided by our customer service team.

4. Refunds Refunds are processed within 7-10 business days after we receive the returned items. Refunds will be issued to the original payment method.

5. Exchanges To exchange a product, follow the return process and place a new order for the desired item.

6. Return Shipping Charges Return shipping charges are the responsibility of the customer unless the return is due to a defect or error on our part. For any questions regarding returns, please contact our customer support team.

Help

We're Here to Assist You

At Berger Paints Pakistan, exceptional customer service is our priority. If you need assistance, please contact us through any of the following methods:

1. Customer Service Phone: 042-35151545-48
Email: info@berger.com.pk
Hours: Monday to Friday, 9 AM - 6 PM


2. Social Media Connect with us on Facebook, Twitter, and Instagram for updates and support.

3. Store Locator Use our Store Locator tool to find a Berger Paints store near you. Your satisfaction is our priority. Please reach out with any questions or concerns.
Category:
Tags:
  • Description

    Apexior No. 1 is an anti-corrosive coating for internal surfaces of boiler drums, tubes, water walls, economisers, steam accumulators, etc.

    Use

    Apexior No. 1 can be used on boiler drums, tubes, water walls, economisers, evaporators, steam accumulators, calorifiers, steam turbine casings, and water softeners in contact with hot water above 93˚C (200˚F) minimum.

    Surface

    All loose mill scale and rust should be removed. Where possible, grit blast to 2nd Quality BS 4232. Recommended maximum profile should be 0.75 µm. If blast cleaning is not practical, make full use of mechanical tools, along with hand wire-brushing to remove loose rust and scale back to a firm edge. Excessive burnishing of steel should be avoided. Remove other contaminants, oil, grease, etc., by use of a solvent. The surface must be clean and dry prior to coating.

    Application

    No separate primer is necessary. One coat of Apexior No. 1 should be applied with brush directly to clean steel. Work well into the surface and ensure all corners, edges, welded nuts/bolts are covered. Allow approximately 6 to 8 hours at 20˚C before overcoating. Apply further 2 coats of Apexior No. 1 with brush or roller, allowing 6 to 8 hours between coats. After applying the last coat, allow 12 to 16 hours for drying to permit solvent evaporation from the system. At this point, the coating will be dry but not cured or water-resistant. It is essential for coating performance that tank or boiler should be filled with water, and water temperature raised to above 100˚C (212˚F) for a minimum 5 hours period. This has the effect of baking the Apexior, thus producing an inert, insoluble and impermeable film.

    Drying Time

    Allow 6 to 8 hours between coats for drying. The last coat should be allowed to dry for 12 to 16 hours to let solvent evaporate from the system. Water temperature should be raised above 100˚C for 5 hours minimum for full curing of paint film.

    Coverage

    Apexior No. 1 covers approximately 8 to 10 meter square per litre at 38 microns DFT depending on surface roughness.

    Packaging

    Apexior No. 1 is available in 5 litre packs.