Description
Surface Preparation
It is extremely essential to completely dry and free the surface from grease, dirt and dust by using sandpaper or scrapers before applying Top Super Putty. NOTE: It is recommended that on previously painted surfaces, scrape to remove all old paint which is loose and flaking and apply a thin coat of Berger Plastron Primer before applying Top Super Putty for a better finish.
Top Super Putty is a ready-to-use high quality putty for interior use only. It forms an ideal base to give a smooth finish for water based paints. It should not be used on exterior surfaces .
Uses
Ready-to-use Top Super Putty is highly recommended where smooth performance is required. Top Super Putty is designed for use on cement surfaces, concrete, chipboard, plywood, etc. NOTE: It is recommended that Top Super Putty should be coated with a thin coat of Berger Plastron Primer if the subsequent finish to be applied is, VIP Super Gloss Robbialac Enamel or All-Rounder Matt Finish Enamel.
Surface Preparation
It is extremely essential to completely dry and free the surface from grease, dirt and dust by using sandpaper or scrapers before applying Top Super Putty. NOTE: It is recommended that on previously painted surfaces, scrape to remove all old paint which is loose and flaking and apply a thin coat of Berger Plastron Primer before applying Top Super Putty for a better finish.
DRYING TIME
Top Super Putty surfaces, under normal conditions dries within 2 hours and is ready for over-coating with finishing paint after 16 hours.
COVERAGE
Top Super Putty covers 5-7m2 per kg per coat.
PACKAGING
Top Super Putty is available in 5kg and 20 kg packs
SAFETY PRECAUTIONS
The container should be protected from extreme hot and cold temperature. It should be properly closed and kept in an up-right position after use.